Metal Roofing, Wherever You Are in Houston County
MAC Construction provides metal roofing Houston County AL homeowners can count on — not just in Dothan proper, but across Ashford, Kinsey, Cowarts, Webb, Rehobeth, Columbia, Cottonwood, Gordon, and Madrid too.
More Real Work From Around the County
AERIAL VIEWFull roofline, panel alignment visible top to bottom
CLOSE-UPSeam and ridge detail on a completed roofDo We Cover Your Town?
Houston County runs about 582 square miles, created in 1903 from parts of Henry, Dale, and Geneva counties. Here's the honest answer on reach, town by town.
This page exists because "metal roofing Houston County" and "metal roofing Dothan" aren't quite the same question. A search from Cowarts or Columbia is really asking whether a Dothan-based company will actually make the drive — the answer is yes, and here's exactly which towns that covers.
Not seeing your exact address? Call and we'll confirm — this list covers the towns, not every rural route in between.
What You Need to Know About Metal Roofing
What is concealed-fastener standing seam?
A metal roofing system where panels attach through hidden clips underneath raised, interlocking seams — no screw ever penetrates the weather-facing surface. That's the meaningful difference from lower-cost exposed-fastener panels, where screws go straight through the face and rely on a rubber washer that ages over time in Alabama's sun and heat.
It's what MAC Construction installs on every standing seam project, and it's the reason concealed-fastener systems typically carry a longer service life than the exposed alternative.
How long does it actually last?
A widely-cited industry figure for quality concealed-fastener standing seam, properly installed, is 40+ years — roughly double a typical asphalt shingle roof, per data from the Metal Construction Association. Real-world lifespan still depends on panel gauge, finish quality, and how well flashing details are maintained over the years, but the underlying system is built for decades, not one roof-replacement cycle.
What does it cost?
Most single-family projects fall between $16,000 and $35,000, depending mainly on roof size, panel gauge and finish, and whether any decking repair turns up during tear-off. A property with an outbuilding added to the same project will price higher simply from the added square footage. Your actual number is a binding written quote after a free, on-site inspection — see our metal roofing cost guide for the full breakdown.
Is a county-wide project handled differently than a Dothan one?
Not in standard or price — but scheduling reflects real drive times (Columbia and Cottonwood take more planning than Kinsey or Cowarts), and a property with a house plus a barn or workshop gets measured and quoted as one job if that's what you want. HOA covenants are also more of a factor inside some Dothan-area subdivisions than in the smaller towns, which mostly don't have them at all.
What color and finish options are available?
Standing seam panels come in a range of factory-applied paint finishes. We'll go over the options that fit your home's style and your budget during the inspection, rather than defaulting to whatever's fastest to order.
Does metal roofing help with cooling costs in the summer?
Many standing seam finishes reflect more solar heat than dark asphalt shingles, which can modestly reduce attic heat gain during Houston County's hot, humid summers. The effect varies by panel color and how well the attic is already ventilated, so it's a genuine factor but not a guaranteed dollar-for-dollar utility savings.
Is Metal the Right Call for Your Property?
You're planning to stay put for 15+ years — the higher upfront cost pays off more clearly the longer you own the home, since you're spreading it across more years without another roof replacement in between.
Your property includes an outbuilding — a barn, workshop, or similar structure, common on the larger lots in Ashford, Cowarts, and Cottonwood, is a genuinely good candidate for the same system as the house, and pricing both together as one project is often more efficient than two separate jobs later.
Low long-term maintenance matters to you — no granule loss, no algae streaking to manage, and flashing at chimneys and vents is really the only thing that ever needs attention over the life of the roof.
You're weighing it against a tighter budget or a shorter ownership timeline — that's a completely reasonable reason to look at shingles instead, and worth saying plainly rather than pushing metal on every roof regardless of fit.
You're not certain yet — a free inspection and an honest, side-by-side comparison against shingles for your specific roof is the fastest way to find out, no pressure either way.
Real Metal Roofing Projects
Aerial View Installation In Progress Seam Detail Project CompletedOne Standard, Every Town in the County
"When my roof was damaged in a storm, the team at MAC was quick to respond and they did quality work. I highly recommend them!"
Watch: Real MAC Construction Project Video
These credentials and this review reflect MAC Construction as a whole, not one town in particular — the same license, the same warranty, and the same review history back every project across Houston County, from Dothan out to Columbia.
Metal Roofing Houston County AL — Your Questions
Yes — this comes up often on larger rural properties. We can quote a house and an outbuilding as one project or separately, whichever fits your timeline and budget.
For most of the county, no — Ashford, Kinsey, Cowarts, Webb, and Rehobeth are all a short drive from our Dothan base. Columbia and Cottonwood are farther out, so those projects may need a bit more scheduling lead time, though the standard and pricing stay identical.
Not with standard installation over solid decking and underlayment — it's not noticeably louder than a shingle roof in most homes.
We perform a full tear-off rather than installing over an existing roof — it lets us inspect and repair the decking properly and avoids trapping moisture between layers.
Standing seam metal can be part of a FORTIFIED roof installation, which has its own requirements beyond the roofing material itself — we can walk through whether it fits during your inspection.
Every metal roofing project comes with a 5-year written workmanship warranty, anywhere in Houston County.
The written quote you receive after the inspection is binding — the number on that document is the number on the invoice, whether the job is five minutes from our Dothan office or out toward Columbia.
Yes, with no obligation, regardless of whether the property is a subdivision home in Dothan or a larger acreage lot out toward Ashford or Cottonwood.
We're a Dothan-based, Alabama-licensed contractor (AL #30154) that's completed 6,000+ roofs since 1991, and we genuinely cover the whole county rather than treating outlying towns as an afterthought — the same written quote, the same 5-year warranty, and the same crew standard everywhere we work.
Looking for repair or full replacement instead? See our roof repair and roof replacement pages for Houston County, or our Dothan-specific metal roofing page if you're in the city core.
Get Your Free Metal Roofing Estimate
Fill out the form and here's what happens next: you'll hear back to schedule your free inspection, we'll walk through an honest comparison against shingles, and you'll get a written quote before any work starts — the same standard in every town listed on this page.